Home  |   Blog  |   Contact Us  |   SiteMap
Steel Handling Equipment

Products
Mud Control & Arena Drainage Dust & Ice Control Round Pen Covers

Two-W Livestock Equipment - GatesTwo-W Livestock Equipment - Gates

The TWO-W line of gates fill any application you may need on the farm or ranch or just around the yard. The gates vary from very heavy duty to a light duty. These gate lines are designed to hang on a wooden post or wall. All the gates come with two 13 Inch bolts mounted on the hinges. All you have to do mount the gates is to drill two 1 inch holes. One of the hinges will slide to allow for some inaccuracy in drilling the holes.

All the gates also come with 30 inches of chain with one end welded to the gate. There is also a chain latch to receive the chain for securing the gate closed. The latch has a skewed slot to minimize the livestock or horses from rubbing the latch open.

Gates come in the following series:

  • 500 Series Corral Gate (heavy duty)
  • 400 Series Corral Gate (heavy duty)
  • 400 Series Split Gate (heavy duty)
  • Thrifty Gate (medium duty)
  • Farm Gate (light duty)

All of these series of gates have been used for many applications, from horses to cattle and buffalo. These include Ranching, Feedlot, Rodeo, and Auction Market applications.

All the Two-W Gates are coated with the Two-W unique grey powder paint system and then baked for a long lasting finish that stands up to the most severe climate and weather conditions.

Click on image to enlarge

500 Series Corral Gates
Available Sizes: 4, 6, 8, 10, 12, 14 and 16 foot lengths (Measurements are opening size).
Height: 6 feet high when mounted the recommended 1 foot high.
Description: 500 Series Corral Gates are constructed of 2" outside diameter 13 gauge high tensile steel. All 500 Series Corral Gates have six horizontal rails and the 10 and 12 foot have 1 row of vertical spokes. The 14 and 16 foot panels have 2 rows of vertical spokes. The 4, 6 and 8 foot panels have no vertical spokes. This gate line is designed to hang on a wooden post or wall. All the gates come with two 13 Inch bolts mounted on the hinges. All you have to do mount the gates is to drill two 1 inch holes. One of the hinges will slide to allow for some inaccuracy in drilling the holes. All the gates also come with 30 inches of chain with one end welded to the gate. There is also a chain latch to receive the chain for securing the gate closed. The latch has a skewed slot to minimize the livestock or horses from rubbing the latch open.
Use: Primary use is corrals and penning for high pressure areas for large cattle, buffalo and horses.
400 Series Corral Gates
Available Sizes: 4, 6, 8, 10, 12, 14 and 16 foot lengths (Measurements are opening size).
Height: 5 feet high when mounted the recommended 1 foot high.
Description: 400 Series Corral Gates are constructed of 2" outside diameter 13 gauge high tensile steel. All 400 Series Corral Gates have five horizontal rails and the 10 and 12 foot have 1 row of vertical spokes. The 14 and 16 foot panels have 2 rows of vertical spokes. The 4, 6 and 8 foot panels have no vertical spokes. This gate line is designed to hang on a wooden post or wall. All the gates come with two 13 Inch bolts mounted on the hinges. All you have to do mount the gates is to drill two 1 inch holes. One of the hinges will slide to allow for some inaccuracy in drilling the holes. All the gates also come with 30 inches of chain with one end welded to the gate. There is also a chain latch to receive the chain for securing the gate closed. The latch has a skewed slot to minimize the livestock or horses from rubbing the latch open.
Use: Primary use is corrals and penning for high pressure areas for large cattle, buffalo and horses.
400 Series Split Gates
Available Sizes: 8 foot lengths (Measurement is opening size).
Height: 5 feet high when mounted the recommended 1 foot high.
Description: The 400 Series Split Gate is constructed of 2" outside diameter 13 gauge high tensile steel. The 400 Series Split Gates has five horizontal rails and 1 row of vertical spokes. This gate is similar to the swing gate in the "Animal Health Center" Main Frame with the major difference being that it fits on a wood post or wall. The main feature of this gate is that you can open either the top half or bottom half independent of each other. The split gate may be used for doctoring cattle or mothering calves or can be used as a creep fence or gate to allow calves through while holding cows back. There is a 408 High Pole Gate with this feature as well. See the 400 Series equipment. This gate line is designed to hang on a wooden post or wall. All the gates come with two 13 Inch bolts mounted on the hinges. All you have to do mount the gates is to drill two 1 inch holes. One of the hinges will slide to allow for some inaccuracy in drilling the holes. Like the other gates, this comes with 30 inches of chain with one end welded to the gate. There is also a chain latch to receive the chain for securing the gate closed. The latch has a skewed slot to minimize the livestock or horses from rubbing the latch open.
Use: Primary use is corrals and penning for high pressure areas for large cattle, buffalo and horses.
Thrifty Gates
Available Sizes: 4, 6, 8, 10, 12, 14 and 16 foot lengths. (Measurements are opening size).
Height: 5 feet high when mounted the recommended 1 foot high.
Description: The Thrifty Gates are constructed of 2" outside diameter 16 gauge high tensile steel. All the Thrifty Gates have five horizontal rails and the 10 and 12 foot have 1 row of vertical spokes. The 14 and 16 foot panels have 2 rows of vertical spokes. The 4, 6 and 8 foot panels have no vertical spokes. This gate line is designed to hang on a wooden post or wall. All the gates come with two 13 Inch bolts mounted on the hinges. All you have to do mount the gates is to drill two 1 inch holes. One of the hinges will slide to allow for some inaccuracy in drilling the holes. All the gates also come with 30 inches of chain with one end welded to the gate. There is also a chain latch to receive the chain for securing the gate closed. The latch has a skewed slot to minimize the livestock or horses from rubbing the latch open.
Use: Primary use is corrals and penning for medium pressure areas for cattle and horses.
Farm Gates
Available Sizes: 4, 6, 8, 10, 12, 14 and 16 foot lengths. (Measurements are opening size).
Height: 5 feet high when mounted the recommended 1 foot high.
Description: The Farm Gates are constructed of 1.5" outside diameter 14 gauge high tensile steel. All the Farm Gates have five horizontal rails and the 10 and 12 foot have 1 row of vertical spokes. The 14 and 16 foot panels have 2 rows of vertical spokes. The 4, 6 and 8 foot panels have no vertical spokes. This gate line is designed to hang on a wooden post or wall. All the gates come with two 13 Inch bolts mounted on the hinges. All you have to do mount the gates is to drill two 1 inch holes. One of the hinges will slide to allow for some inaccuracy in drilling the holes. All the gates also come with 30 inches of chain with one end welded to the gate. There is also a chain latch to receive the chain for securing the gate closed. The latch has a skewed slot to minimize the livestock or horses from rubbing the latch open.
Use: Primary use is corrals and penning for low pressure areas for cattle and horses.